Forums Music Speaker Plans Speakers

Viewing 25 posts - 76 through 100 (of 121 total)
  • Author
    Posts
  • #1152328
    BioTech
    Participant

      Yeah no worries Dan, I don’t think anyone was insinuating that. Just seemed people were telling MrAHC to make sure the new drivers he bought would match the original ones you had put in.

      #1207910
      BioTech
      Participant

        Yeah no worries Dan, I don’t think anyone was insinuating that. Just seemed people were telling MrAHC to make sure the new drivers he bought would match the original ones you had put in.

        #1152315
        Anonymous

          recon i’m just gona stick a 15 inch, 350w, 8ohm eminence bass speaker in? what does everyone else recon? the p audio ones are to expencive realy.

          #1207875
          Anonymous

            recon i’m just gona stick a 15 inch, 350w, 8ohm eminence bass speaker in? what does everyone else recon? the p audio ones are to expencive realy.

            #1152335
            elretardo87
            Participant
              MrAHC wrote:
              recon i’m just gona stick a 15 inch, 350w, 8ohm eminence bass speaker in? what does everyone else recon? the p audio ones are to expencive realy.

              It might sound alright as you have the 10″ above it.

              #1207928
              elretardo87
              Participant
                MrAHC wrote:
                recon i’m just gona stick a 15 inch, 350w, 8ohm eminence bass speaker in? what does everyone else recon? the p audio ones are to expencive realy.

                It might sound alright as you have the 10″ above it.

                #1152316
                Anonymous
                  elretardo87 wrote:
                  It might sound alright as you have the 10″ above it.

                  well what do you sugest?

                  #1207878
                  Anonymous
                    elretardo87 wrote:
                    It might sound alright as you have the 10″ above it.

                    well what do you sugest?

                    #1152326
                    General Lighting
                    Moderator
                      MrAHC wrote:
                      recon i’m just gona stick a 15 inch, 350w, 8ohm eminence bass speaker in? what does everyone else recon? the p audio ones are to expencive realy.

                      from my (limited) knowledge of what went into system (trying to think back 14 years isn’t that easy!) I would say it is not too far off what went in the cabs in the first place back in 1994..

                      #1207905
                      General Lighting
                      Moderator
                        MrAHC wrote:
                        recon i’m just gona stick a 15 inch, 350w, 8ohm eminence bass speaker in? what does everyone else recon? the p audio ones are to expencive realy.

                        from my (limited) knowledge of what went into system (trying to think back 14 years isn’t that easy!) I would say it is not too far off what went in the cabs in the first place back in 1994..

                        #1152317
                        Anonymous
                          General Lighting wrote:
                          from my (limited) knowledge of what went into system (trying to think back 14 years isn’t that easy!) I would say it is not too far off what went in the cabs in the first place back in 1994..

                          thats what i’m thinkin what other eminence would it of been? its doin me napper in now just wana get em workin again before i loose me rag wi em…

                          #1207881
                          Anonymous
                            General Lighting wrote:
                            from my (limited) knowledge of what went into system (trying to think back 14 years isn’t that easy!) I would say it is not too far off what went in the cabs in the first place back in 1994..

                            thats what i’m thinkin what other eminence would it of been? its doin me napper in now just wana get em workin again before i loose me rag wi em…

                            #1152363
                            d.r.e.a.m
                            Participant
                              elretardo87 wrote:
                              I’m afraid if you bought an eminence delta 15lfa its not really suited to your cabinet. It won’t sound horrendous but you won’t be getting the most out of it. You have essentially bought a drive unit designed for bass applications so with the 1″ compression driver your gona be left with a serious dip between the hipass of about 2khz reccomended on the peavey compression driver and the steep drop in output above 1khz of the eminence driver.

                              Better off going with what was in the originally which would be a peavey black widow. We used to have a pair of HP400’s (well when I say have I mean it in the loosest possible sense but I have dealt with them before a fair bit) anyway the best driver we could find was a peavey black widow. Phone peavey and ask which one I can’t remember which one we used in the end as there were two that were suited since they updated the design. A rig needs to cover a full frequency range or it will sound pap….as bass ain’t everything

                              are the tops bw’s 2?yea deffo no what your sayin as i have 3 12 inch which i use for mids an a tweater box on top so i cover the full frequency range quite easly.hense why i said they make good bass cabs at the mo because the rest is coverd (dont mean to sound rude but i do pretty much no what im doin just a litle advise here n there dont go amiss as you never no what yer gunna learn…) thanx any way i will get on peaveys case an see what they gota say as i personally think they are 1 shit hot pair of speakers…what about the xover will peavey be able to help with this to or do you no of a better source?

                              #1208003
                              d.r.e.a.m
                              Participant
                                elretardo87 wrote:
                                I’m afraid if you bought an eminence delta 15lfa its not really suited to your cabinet. It won’t sound horrendous but you won’t be getting the most out of it. You have essentially bought a drive unit designed for bass applications so with the 1″ compression driver your gona be left with a serious dip between the hipass of about 2khz reccomended on the peavey compression driver and the steep drop in output above 1khz of the eminence driver.

                                Better off going with what was in the originally which would be a peavey black widow. We used to have a pair of HP400’s (well when I say have I mean it in the loosest possible sense but I have dealt with them before a fair bit) anyway the best driver we could find was a peavey black widow. Phone peavey and ask which one I can’t remember which one we used in the end as there were two that were suited since they updated the design. A rig needs to cover a full frequency range or it will sound pap….as bass ain’t everything

                                are the tops bw’s 2?yea deffo no what your sayin as i have 3 12 inch which i use for mids an a tweater box on top so i cover the full frequency range quite easly.hense why i said they make good bass cabs at the mo because the rest is coverd (dont mean to sound rude but i do pretty much no what im doin just a litle advise here n there dont go amiss as you never no what yer gunna learn…) thanx any way i will get on peaveys case an see what they gota say as i personally think they are 1 shit hot pair of speakers…what about the xover will peavey be able to help with this to or do you no of a better source?

                                #1152318
                                Anonymous

                                  just rang ‘davemanchester’ as were workin on somethin and quized him and he goes with my theory that stickin a 350w bass in will do the job. The xovers look like they have been took out of the equasion so they can be run as mids.
                                  There havin 15 inch 350w eminence delta bass in em.
                                  Well its been a learning process 😉

                                  #1207884
                                  Anonymous

                                    just rang ‘davemanchester’ as were workin on somethin and quized him and he goes with my theory that stickin a 350w bass in will do the job. The xovers look like they have been took out of the equasion so they can be run as mids.
                                    There havin 15 inch 350w eminence delta bass in em.
                                    Well its been a learning process 😉

                                    #1152336
                                    elretardo87
                                    Participant
                                      d.r.e.a.m wrote:
                                      dont mean to sound rude but i do pretty much no what im doin just a litle advise here n there dont go amiss as you never no what yer gunna learn..

                                      Sorry if I insulted you its just that the answers you gave AHC were a bit off, especially about how to choose a driver for a cabinet.

                                      #1207931
                                      elretardo87
                                      Participant
                                        d.r.e.a.m wrote:
                                        dont mean to sound rude but i do pretty much no what im doin just a litle advise here n there dont go amiss as you never no what yer gunna learn..

                                        Sorry if I insulted you its just that the answers you gave AHC were a bit off, especially about how to choose a driver for a cabinet.

                                        #1152353
                                        Raj
                                        Participant

                                          The proof of the cabs is in the hearing folks 😉 – you need to be happy with how they sound. We all like something slightly different in our speakers :weee:

                                          #1207976
                                          Raj
                                          Participant

                                            The proof of the cabs is in the hearing folks 😉 – you need to be happy with how they sound. We all like something slightly different in our speakers :weee:

                                            #1152319
                                            Anonymous
                                              Raj wrote:
                                              The proof of the cabs is in the hearing folks 😉 – you need to be happy with how they sound. We all like something slightly different in our speakers :weee:

                                              the ev tops i got off of dan will make up for any loss in mid or top end anyway. there wicked wee things so they are deffo worth the journey down

                                              #1207886
                                              Anonymous
                                                Raj wrote:
                                                The proof of the cabs is in the hearing folks 😉 – you need to be happy with how they sound. We all like something slightly different in our speakers :weee:

                                                the ev tops i got off of dan will make up for any loss in mid or top end anyway. there wicked wee things so they are deffo worth the journey down

                                                #1152342
                                                Dan Ooops
                                                Participant

                                                  All sorted then….350W bass drivers, and the 10″ with the EVs on top. Banging!

                                                  And thanks guys, I wasn’t feeling a proper kicking, and price was right for the stuff. We loved em when we built them – And I reckon over time Mr AHC will have a play, get to know them, and use them as best it suits his rig. Fucking solid boxes, well constructed – load em up and let me know where I can hear them!!

                                                  Dan
                                                  😉

                                                  #1207947
                                                  Dan Ooops
                                                  Participant

                                                    All sorted then….350W bass drivers, and the 10″ with the EVs on top. Banging!

                                                    And thanks guys, I wasn’t feeling a proper kicking, and price was right for the stuff. We loved em when we built them – And I reckon over time Mr AHC will have a play, get to know them, and use them as best it suits his rig. Fucking solid boxes, well constructed – load em up and let me know where I can hear them!!

                                                    Dan
                                                    😉

                                                    #1152320
                                                    Anonymous

                                                      fixed with 15 inch emminence betas. first one done and the grills resprayed.:weee::weee:

                                                      sound prety good imo

                                                      http://www.youtube.com/watch?v=hlPmEg9f_D8

                                                    Viewing 25 posts - 76 through 100 (of 121 total)
                                                    • You must be logged in to reply to this topic.

                                                    Forums Music Speaker Plans Speakers