Forums Music Sound Engineering Soundproofiing small project studio

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #1052659
    General Lighting
    Moderator

      got most of the kit in place now, but one minor issue remains if I plan to do radio shows later in the evening. my speakers are the 2 x JBL control 1s and also 2 generic “small PA” speakers with 10″ woofer for a bit of extra bass. (I deliberately picked these smaller ones rather than a wall full of Celestion’s finest…) I’m lucky enough to have a end house and the room I use for AV stuff is on the side with no neighbours, but there is of course a point where if I crank it up loud enough there will be a potential noise nuisance to the neighbours. Although I can of course switch to the small JBLs alone late at night, these still can make quite a racket. Plus I work long hours so its not often for me to only have the night time to do music stuff.

      most of the sound leaks through the door frame. Other than using something like a draught excluder to stop up a gap of 10mm below my door, are there any other easy ways of keeping the noise inside this room as much as possible? I’ve seen some (pricey) things in the CPC catalogue but I think they are more for stopping echo etc in large places when producing or recording instruments using microphones…

      #1251778
      DaftFader
      Participant

        hang a carpet or some other thick cloth over the door. it’s the cheepest way … there’s better ways but they cost money.

        sec i’ll find you a vid of wht i mean

        #1251779
        DaftFader
        Participant

          well it’s self explanatory really, and can’t find a vid showing a carpet over a door, but i know it kinda works if you’re on a budget.

          How to Soundproof a Room : DIY Soundproofing – YouTube

          that’s a vid of a guy what really knows what his talking about, you might be able to take a few ideas from him and apply them to your room improvising a bit.

          #1251777
          thelog
          Participant

            Awsome, I wish I couild do the same. I wouldn’t be allowed though. My girlfriend would be like noooo…….waayyy.

            #1251776
            BioTech
            Participant

              Without building a room inside a room and then stuffing the cavity with insulation I don’t think there is a particularly easy way to prevent bass from traveling through surfaces.

              Daft has the best solution with the carpet. It won’t cancel it out but it will go a little way to removing some of it. Maybe create an additional frame on the actual door which tightly fits the door frame, this could be packed with insulation, covered with MDF and then carpeted. Bit of work involved though.

              #1251775
              General Lighting
              Moderator

                cheers both of you – actually got fuckloads of old carpet up in the roof space and was wondering what to do with it 🙂 although it is shedding the rubber bit at the bottom there is enough to put it back to back and glue/gaffer tape it together

                BTW for those who speak British English “sheet rock” is plasterboard or drywall – although in my case sound leakage from a window isn’t a problem. however in the USA, chaps like that dude probably live in houses made of wood with no double glazing – though I have always envied the “den” most American blokes seem to have for making music or doing other heavy work in…

              Viewing 6 posts - 1 through 6 (of 6 total)
              • You must be logged in to reply to this topic.

              Forums Music Sound Engineering Soundproofiing small project studio