Speakers

This topic has 120 replies, 9 voices, and was last updated February 8, 2008 at 3:20 pm by sawa1600.

Viewing 25 posts - 1 through 25 (of 121 total)

1 2 3 4 5 →

Author

Posts
January 17, 2008 at 6:56 pm #1043412
Anonymous
Need to replace a pair of emminence 15 inch speakers though i have no idea what emminence speakers i need to replace them with as theres no info on the back of em??? Help!
January 17, 2008 at 7:02 pm #1152343
Raj
Participant
http://www.eminence.com/

http://www.eminence.com/proseries.asp?speaker_size=15

that any help ?
January 17, 2008 at 7:02 pm #1207949
Raj
Participant
http://www.eminence.com/

http://www.eminence.com/proseries.asp?speaker_size=15

that any help ?
January 17, 2008 at 7:03 pm #1152356
d.r.e.a.m
Participant
MrAHC wrote:

Need to replace a pair of emminence 15 inch speakers though i have no idea what emminence speakers i need to replace them with as theres no info on the back of em??? Help!

i just recently replaced the 15 inch cone in my jbl with an eminence.as far as i no im pretty sure they only do 1 power rating for the 15 inch (not 100% on this tho) the best place to buy eminence drivers that ive found is maplins..hope ive been some help.did you buy all of dans gear?couldnt have made it up there to pick up that tweaker box tho pretty gutted….talk soon..:bounce_fl :bounce_g: :bounce_fl :bounce_g: :bounce_fl :bounce_g:
January 17, 2008 at 7:03 pm #1207983
d.r.e.a.m
Participant
MrAHC wrote:

Need to replace a pair of emminence 15 inch speakers though i have no idea what emminence speakers i need to replace them with as theres no info on the back of em??? Help!

i just recently replaced the 15 inch cone in my jbl with an eminence.as far as i no im pretty sure they only do 1 power rating for the 15 inch (not 100% on this tho) the best place to buy eminence drivers that ive found is maplins..hope ive been some help.did you buy all of dans gear?couldnt have made it up there to pick up that tweaker box tho pretty gutted….talk soon..:bounce_fl :bounce_g: :bounce_fl :bounce_g: :bounce_fl :bounce_g:
January 17, 2008 at 7:07 pm #1152357
d.r.e.a.m
Participant
Raj wrote:

http://www.eminence.com/

http://www.eminence.com/proseries.asp?speaker_size=15

that any help ?

nice 1 raj thats some help for me to as i need to get new drivers for the tops on my peaveys…:wink:
January 17, 2008 at 7:07 pm #1207985
d.r.e.a.m
Participant
Raj wrote:

http://www.eminence.com/

http://www.eminence.com/proseries.asp?speaker_size=15

that any help ?

nice 1 raj thats some help for me to as i need to get new drivers for the tops on my peaveys…:wink:
January 17, 2008 at 7:09 pm #1152344
Raj
Participant
🙂 excellent – glad to help 🙂
January 17, 2008 at 7:09 pm #1207952
Raj
Participant
🙂 excellent – glad to help 🙂
January 17, 2008 at 7:13 pm #1152355
Ruff Beat Provider
Participant
If your replacing them do you not have the old driver to check?
What kinda speaker are you changing them for? Sub bass/kick bass/mid?
January 17, 2008 at 7:13 pm #1207981
Ruff Beat Provider
Participant
If your replacing them do you not have the old driver to check?
What kinda speaker are you changing them for? Sub bass/kick bass/mid?
January 17, 2008 at 7:17 pm #1152304
Anonymous
Ruff Beat Provider wrote:

If your replacing them do you not have the old driver to check?
What kinda speaker are you changing them for? Sub bass/kick bass/mid?

fuck knows there from them mids i bought off danooops on here. theres nowt on the back not even what wat they are or what Ohms and i’m shit at stuff like that.
January 17, 2008 at 7:17 pm #1207846
Anonymous
Ruff Beat Provider wrote:

If your replacing them do you not have the old driver to check?
What kinda speaker are you changing them for? Sub bass/kick bass/mid?

fuck knows there from them mids i bought off danooops on here. theres nowt on the back not even what wat they are or what Ohms and i’m shit at stuff like that.
January 17, 2008 at 7:24 pm #1152345
Raj
Participant
You should be able to narrow it down using the spec sheets – they tell you what they weigh and all the details of how they look. They will at least allow you to narrow it down anyway. Every speaker driver weighs something different.

Dan may be able to recall what amp was powering them which would also help you out 😉
January 17, 2008 at 7:24 pm #1207954
Raj
Participant
You should be able to narrow it down using the spec sheets – they tell you what they weigh and all the details of how they look. They will at least allow you to narrow it down anyway. Every speaker driver weighs something different.

Dan may be able to recall what amp was powering them which would also help you out 😉
January 17, 2008 at 7:34 pm #1152305
Anonymous
Raj wrote:

You should be able to narrow it down using the spec sheets – they tell you what they weigh and all the details of how they look. They will at least allow you to narrow it down anyway. Every speaker driver weighs something different.

Dan may be able to recall what amp was powering them which would also help you out 😉

probbly easeyr just to get rid of the cabs n buy new. it will put me behind scedule for spring partys otherwise.
January 17, 2008 at 7:34 pm #1207849
Anonymous
Raj wrote:

You should be able to narrow it down using the spec sheets – they tell you what they weigh and all the details of how they look. They will at least allow you to narrow it down anyway. Every speaker driver weighs something different.

Dan may be able to recall what amp was powering them which would also help you out 😉

probbly easeyr just to get rid of the cabs n buy new. it will put me behind scedule for spring partys otherwise.
January 17, 2008 at 7:56 pm #1152306
Anonymous
looks like the delta-pro is the man for the job but it runs at 8 ohm. sure the others were at 4ohm??? fuckin confuses me so it does………
January 17, 2008 at 7:56 pm #1207852
Anonymous
looks like the delta-pro is the man for the job but it runs at 8 ohm. sure the others were at 4ohm??? fuckin confuses me so it does………
January 17, 2008 at 8:27 pm #1152346
Raj
Participant
The resistance will vary depending on how you link up your speakers – you can take 2 x 8 ohm speakers and connect them in parallel and get speaker resistance = 4 ohms

http://en.wikipedia.org/wiki/Series_and_parallel_circuits

might help you out:wink:
January 17, 2008 at 8:27 pm #1207957
Raj
Participant
The resistance will vary depending on how you link up your speakers – you can take 2 x 8 ohm speakers and connect them in parallel and get speaker resistance = 4 ohms

http://en.wikipedia.org/wiki/Series_and_parallel_circuits

might help you out:wink:
January 17, 2008 at 8:33 pm #1152358
d.r.e.a.m
Participant
Ruff Beat Provider wrote:

If your replacing them do you not have the old driver to check?
What kinda speaker are you changing them for? Sub bass/kick bass/mid?

no i dont tw@ mate of mine left em in da cupboard when he moved out of his house real sharp along with 4 of my 15 inch drivers an the wood (cut up an ready to assemble!!) so a bit pissed off about that 1!!they are mid/top flared horns so will have to check dimensions befor buying….why did you ask??….lol…thought you was talkin to me???loosin it i swear!!
January 17, 2008 at 8:33 pm #1207989
d.r.e.a.m
Participant
Ruff Beat Provider wrote:

If your replacing them do you not have the old driver to check?
What kinda speaker are you changing them for? Sub bass/kick bass/mid?

no i dont tw@ mate of mine left em in da cupboard when he moved out of his house real sharp along with 4 of my 15 inch drivers an the wood (cut up an ready to assemble!!) so a bit pissed off about that 1!!they are mid/top flared horns so will have to check dimensions befor buying….why did you ask??….lol…thought you was talkin to me???loosin it i swear!!
January 17, 2008 at 9:01 pm #1152329
elretardo87
Participant
If you are buying new drivers CHECK THE THIELE SMALL PARAMETERS FIRST.

Compare the paramteres of the old driver with the new one and if they are very similar then it will work in the cab.Buying any old 15″ driver will sound shite, especially as people tend to go for the most powerful driver they can afford.

Mr AHC if your stuck stick up a picture of the back of the driver and I’ll see if I an help.

d.r.e.a.m if you tel us what type of cabinets you have I can suggest the ones that will be most appropriate if theat helps. As your wasting money on drivers if you have the wrong ones in as they are not designed for the job so they will sound shit or break, although probably both.
January 17, 2008 at 9:01 pm #1207913
elretardo87
Participant
If you are buying new drivers CHECK THE THIELE SMALL PARAMETERS FIRST.

Compare the paramteres of the old driver with the new one and if they are very similar then it will work in the cab.Buying any old 15″ driver will sound shite, especially as people tend to go for the most powerful driver they can afford.

Mr AHC if your stuck stick up a picture of the back of the driver and I’ll see if I an help.

d.r.e.a.m if you tel us what type of cabinets you have I can suggest the ones that will be most appropriate if theat helps. As your wasting money on drivers if you have the wrong ones in as they are not designed for the job so they will sound shit or break, although probably both.
Author

Posts